Rogers 4350B PCB Fabrication
PCB Fabrication Company provides Rogers 4350B PCB fabrication for high frequency, RF, microwave, antenna, wireless communication, radar, and controlled impedance printed circuit board applications.
What Is Rogers 4350B PCB?
Rogers 4350B PCB is a high frequency printed circuit board manufactured with Rogers RO4350B laminate. It is widely used when a design needs more stable electrical performance than standard FR4 material, especially at RF and microwave frequencies.
Rogers 4350B material is commonly selected for antenna boards, RF modules, wireless communication equipment, radar circuits, microwave devices, filters, power amplifiers, and other high frequency PCB applications.
Typical Rogers 4350B PCB Applications
- RF PCB and microwave PCB
- Antenna PCB and wireless communication boards
- Radar and sensor circuit boards
- Power amplifier PCB
- High speed digital and mixed signal PCB
- Controlled impedance PCB
- Test equipment and measurement instruments
- Industrial and commercial RF modules
Benefits of Rogers 4350B PCB
| Benefit | Explanation |
|---|---|
| High Frequency Performance | Rogers 4350B is suitable for RF and microwave circuits where standard FR4 may not provide stable electrical performance. |
| Lower Loss Than FR4 | It helps reduce signal loss in high frequency designs compared with common FR4 laminates. |
| Stable Electrical Properties | Stable dielectric performance helps support predictable impedance and signal behavior. |
| Manufacturing Compatibility | Rogers 4350B can be fabricated using PCB manufacturing processes that are more practical than many PTFE-based materials. |
| Suitable for RF Design | It is widely used for antenna, RF amplifier, filter, microwave, and wireless communication circuits. |
Rogers 4350B PCB Capability
| Item | Capability |
|---|---|
| Material | Rogers 4350B, Rogers 4003C, and other RF materials upon review |
| Board Type | Double-sided PCB and multilayer PCB |
| Layer Count | 2 layers, 4 layers, and 6 layers for online Rogers PCB quotation; 8 layers or higher upon engineering review. |
| Copper Weight | 1 oz, 2 oz or other copper weight upon review |
| Surface Finish | ENIG, immersion silver, lead-free HASL, and other options |
| Special Requirements | Controlled impedance, RF stack-up, tight registration, and special material thickness upon review |
Rogers 4350B PCB vs FR4 PCB
| Item | FR4 PCB | Rogers 4350B PCB |
|---|---|---|
| Main Use | General electronic products and standard PCB fabrication | RF, microwave, antenna, radar, and high frequency PCB applications |
| High Frequency Loss | Higher loss at high frequency | Lower loss and more stable high frequency performance |
| Cost | Lower material and fabrication cost | Higher material cost and more specialized fabrication review |
| Design Review | Standard review is often sufficient | Stack-up, impedance, dielectric thickness, and material selection should be reviewed carefully |
Rogers 4350B PCB Design Considerations
1. Material Thickness
The dielectric thickness affects impedance, insertion loss, finished board thickness, and RF performance. Please specify the required Rogers 4350B thickness when requesting a quotation.
2. Controlled Impedance
Many Rogers 4350B PCB designs require controlled impedance. Please provide impedance values, trace width, spacing, reference plane information, and stack-up requirements.
3. Surface Finish
ENIG and immersion silver are commonly considered for RF PCB designs, depending on soldering requirements, signal behavior, assembly needs, and customer preference.
4. Hybrid Construction
Some designs may use Rogers material in RF layers and FR4 material in other layers. Hybrid Rogers and FR4 PCB structures require careful engineering review.
Rogers 4350B PCB Quote
To request a Rogers 4350B PCB quote, please prepare Gerber files, drill files, material requirement, board thickness, copper weight, quantity, surface finish, controlled impedance requirements, and any RF stack-up notes.
Please use our Rogers PCB quotation page or contact us directly by email.
Get a Rogers PCB Quote | [email protected]
Rogers 4350B PCB Fabrication FAQ
What is Rogers 4350B PCB used for?
Rogers 4350B PCB is commonly used for RF, microwave, antenna, radar, wireless communication, and controlled impedance applications.
Is Rogers 4350B better than FR4?
For high frequency and RF applications, Rogers 4350B usually provides more stable electrical performance and lower signal loss than standard FR4.
Can Rogers 4350B be used for multilayer PCB?
Yes. Rogers 4350B can be used in multilayer PCB construction, including hybrid Rogers and FR4 stack-ups upon engineering review.
What files are required for a Rogers 4350B PCB quotation?
Please send Gerber files, drill files, material thickness, board quantity, copper weight, surface finish, and controlled impedance requirements if applicable.
Can you quote Rogers 4350B PCB online?
Yes. Please use our Rogers PCB quotation page or contact us directly by email with your files and specifications.